EV Charger Installation in Willingham

Home chargers wired properly from your main board, across Cambridge

EV Charger Installation

Peacock Elec installs home EV chargers across Willingham, Cambridge and the surrounding villages for between £1,000 and £1,500 supplied and fitted. Every charger is wired from your main consumer unit, not added as a quick spur, and load tested so it runs safely alongside the rest of your home. Sam carries out the full job personally, from survey to certification.

A home EV charger should be installed properly, from your main consumer unit, not tacked on as a quick fix. That is how I approach every charger I fit across Willingham, Cambridge and the surrounding villages. It costs a little more time up front, but it means your charger is safe, reliable and ready to look after your car for years.

I start by assessing your existing electrics and how much spare capacity your supply has. That tells us whether the charger can be added straight away or whether a small upgrade is worth doing first. I will always be honest about what your home actually needs rather than selling you extras you do not.

On the day I run a dedicated, correctly protected circuit to the charger, fit it neatly where you want it, and keep the cable runs tidy. There is no mess left behind and no shortcuts taken, even when the easy route would be quicker. The end result is what matters.

Once it is in, I test everything, talk you through how it works, and provide your certification. Pricing is typically £1,000 to £1,500 supplied and fitted, and I am happy to give you a clear quote before any work starts.

PRICE GUIDE £1,000 – £1,500
Includes Supply & install
Testing Tested & certified
BOOKING By appointment
Free quotes Yes
Coverage Willingham & Cambridge

Frequently Asked Questions

EV Chargers Questions

What areas do you cover?

I am based in Willingham and cover Cambridge and the surrounding villages, including Over, Swavesey, Northstowe, Longstanton, Cottenham, Histon, Cambourne, Bar Hill, Waterbeach and Ely. If you are not sure whether you are in my area, give me a call on 07500 500506 and I will let you know.

Are you a qualified, registered electrician?

Yes. Peacock Elec is NAPIT registered, so all of my work is carried out and certified to current wiring regulations. You get proper documentation with every job, and consumer unit upgrades also come with a CAD circuit diagram of your home.

Who actually does the work?

I do. Peacock Elec is just me, Sam Peacock, and my van. You deal with me from the first phone call to the finished job, so nothing gets lost between an office and a subcontractor and the standard stays consistent.

Do you do other electrical work besides EV chargers and consumer units?

Yes. EV charger installations and consumer unit upgrades are my specialities, but I also handle smoke alarms, additional sockets and lighting, fault finding, inspections and full rewires. If you have an electrical job in mind, give me a call and I will talk you through it.

Will you keep the work tidy?

Always. I understand that while I am working it is still your home and not a worksite, and I treat it that way. There is sometimes unavoidable disruption when channelling wires or isolating the supply, but I keep it to a minimum and you will not need to clean up after me.

How do I get a quote?

Just call or message me on 07500 500506, or fill in the enquiry form on this site with a short description of the work. I will get back to you at my earliest convenience to talk it through and arrange a look if needed.

How much does a home EV charger cost to install?

A home EV charger is typically £1,000 to £1,500 supplied and fitted. The exact price depends on the charger you choose and how far it needs to run from your consumer unit. I will give you a clear quote before any work starts.

Which EV charger do you recommend?

There are several good options and the right one depends on your car, your home and how you want to use it. I am happy to talk you through the choices, including smart chargers that let you charge on cheaper overnight tariffs, and recommend one that suits you rather than one that suits me.

Do you wire the charger from the main board?

Yes, always. I install EV chargers properly from your main consumer unit on their own correctly protected circuit, rather than spurring off existing wiring as a quick fix. It is safer, more reliable, and it is how the job should be done.

Will my electrics cope with a charger?

Most homes are fine, but it depends on your existing supply and how much spare capacity you have. I check this as part of the job and will tell you honestly if anything needs upgrading first. Where needed, load management can also let a charger run safely alongside the rest of your home.

Do I get certification for the installation?

Yes. Every EV charger installation is fully tested and certified on completion, and I will talk you through how the charger works before I leave.

How much is a new consumer unit?

A consumer unit or fuse board upgrade is typically £600 to £1,200 supplied and fitted. The price depends on the size of the board and whether any remedial work is needed once the old unit comes off. I will confirm a clear price after taking a look.

Do I actually need my fuse board upgrading?

Sometimes yes and sometimes no, and I will always be honest about it. Older boards without RCD or RCBO protection are worth upgrading for safety, and an upgrade is often recommended alongside other work such as a rewire or an EV charger. If yours is fine as it is, I will tell you.

What is the CAD circuit diagram you provide?

It is a clear computer drawing of your home showing where your lights and sockets are, each labelled with the circuit that isolates it. If a circuit trips you can see exactly which one to check and what is connected to it, which makes finding a fault far easier. Most electricians do not provide this, but I include it with consumer unit upgrades.

What is the difference between an RCD and RCBO board?

On a modern RCBO board every circuit has its own protection, so a fault on one circuit only trips that circuit rather than taking out half the house. It is safer and far more convenient than older split-load boards, and it is what I fit as standard.

Do you fit surge protection?

Where it is suitable, yes. Surge protection helps guard your appliances and electronics against spikes on the supply. I will let you know whether it makes sense for your installation as part of the quote.